適用標準對于不同的標準，燃燒速率，需要配備不同的配件
gb/t 14644-2014 紡織品 燃燒性能 45°方向燃燒速率的測定
gb 31701-2015 嬰幼兒及兒童紡織產品安全技術規范
gb/t 31888-2015 -生校服
cfr 1610
astm f2100-112018-面罩用材料性能的標準規范
b 31701-2015 嬰幼兒及兒童紡織產品安全技術規范
gb/t 31888-2015 -生校服
cfr 1610
astm f2100-112018-面罩用材料性能的標準規范
(8)
pulley/eye (g 5 ，嬰幼兒紡織產品燃燒速率測定儀廠， fig. 2). the pulley/eye is the support
and guide for the stop cord. other guides are specifically identified as the skyhook (g1 )，
the l-shaped guides (g2，嬰幼兒紡織產品燃燒速率測定儀， g3)&a pigtail guide (g6).see
§1610.61(c)(1) for a clarification of the stop cord ition.
8 滑輪或環眼g 5，圖2。滑輪或眼是停止線的支撐和引導
g其他導軌被明確標識為天鉤g1、l形導軌g2、g3和尾光纖導軌g6。有關停止線位置的說明，請參見§1610.61c1。
(3)
after the specimen has been put in place on the carriage&fastened by means
of the clamp， the brush is raised， the carriage pushed to the rear，&the
brush lowered to the face of the specimen. the carriage is then drawn forward
by hand at a uniform rate.
3 試樣放在托架上并用夾具固定后，電刷升起，托架推到后面，電刷降到試樣表面。然后用手以勻速向前拉動馬車。
|
登錄后臺
